Top 3 Things to Know Before You Stain Your Deck

A deck should be maintained well because it creates the most valuable and beautiful part of your home. A stain helps to protect your deck because piles of snow or pounding rain can create have a negative impact on exterior wood. If you want your deck to withstand tough weather and other harsh elements thrown by nature, you can always maintain it through staining.

However, there are a few things you need to consider to know the right time to stain your deck. Not only does it help your deck remain in good condition, but it also provides new looks to the structure. Time and weather determine the best time to stain your deck. The time taken to finish staining will also depend on the size of your deck. In this article, we will be looking at top 3 things you should know before you stain your deck.

1. Prepare the Surface You want to Stain

The first thing you need to do is to clear the surface so that the wood can be free from dirt, grime or dust. Wood stain cannot adhere properly to cracks, peels, or damp surfaces. The best time to carry out the staining is during dry weather that lasts for at least two consistent days. Direct sunlight will make the stain to dry too fast before it can be absorbed properly in the wood.

Wear a safety mask as it prevents you from inhaling dust when sanding splintered spots. A putty knife could be useful in cleaning in between the boards before sweeping the deck. Use a deck cleaner or a pressure washer to clean the wood. If your deck is made of pressure-treated lumber with chromated copper arsenate, it is important to hire a professional to safely remove the dust, debris and finish. The chemical compound incorporated in this wood is meant to prevent rot and insects. The toxic arsenic contained in it can be released into the air and surrounding environment if the sanding is not done properly.

2. Use the Right Type of Stain on Your Wood

The stain type on your deck will affect the choice you have to make when selecting a new stain. A clear or semitransparent stain cannot be applied on a wood that is coated with a solid stain. However, you can apply a solid stain over other varieties because it is thick enough to get absorbed into wood. It is important to make sure the color is consistent if your project requires several gallons of stain.

You can stain two or more boards at once using long smooth strokes. Solid stains should be applied in thin coats to prevent puddles. If a lot of the stain is applied on the boards, it will not soak into the wood and the stain will flake off the moment it dries out. To ensure that there are no missed spots, apply two coats on the deck boards to create a uniform finish.

3. Use the Right Brushes

If you are using a water-based stain, consider synthetic brushes to get the job done. Natural bristles may lose their rigidity because they are hollow and they take up water in the finish. If you prefer using a roller, you will need one with a nap which is a quarter inch or perhaps shorter. This prevents pooling as it allows you to apply the stain in thin layers so that it gets absorbed into the wood. To protect the siding or nearby surfaces from the stain, use a painter’s tape to seal off the areas.

Although a roller is faster when handling the project, brushing is one of the best ways to force the sealer onto pores that are open. As you apply the stain, make sure to get the sealer into space where the two boards join together. Strike your brush slowly over the entire length of two or three boards at once. If you lap over or spill the stain onto the adjacent boards, you may have splotches that will be difficult to conceal.

If you want to maintain the appearance of your deck for more years, consider staining and periodic refinishing as the essential steps to achieve the best results. There are several choices when it comes to selecting an ideal deck stain and you need to be aware of what works best for your boards. A good stain provides new looks to the structure and helps keep your deck in good condition.